UniBlimp Types and sizes

from 7 to 15 m (or more) - and - hours to days autonomy

UNiBlimp fleet

1.UniBlimp 7m

 

UniBlimp 7 m is our base model. It is designed for several hours of flight autonomy and able to carry GoPro with gimbal or other similar weight DJI or other camera solution. It has single front strong brushless motor, back reverse motor, Stabilisers with ailerons and bases for camera rig, batteries and electronics. Depending on your needs it can be delivered with Futaba, few miles range, or with DMD 20 km range. Autopilot is optional for this model/size.

Specification UniBlimp related:
- 7 x 1.5 m
- Volume 9.2 m3
- Double welding technology
- Envelope material 100 microns White Polyurethane High Grade UK quality
- Helium permeability 0.5 to 1% maximum daily on total volume - guaranteed
- Single main front motor design
- Security RC safety valve
- 4 stabilizers with ailerons
- 1 low fin reserve motor
- Elite 520 kv Brush-less motor 
- 90 A ESC 
- LiPo battery 2 x 5000 mAh 6S 22 V - for the main motor and on-board RC System
- LiPo battery 5000 mAh 3S 11.1 V for the Camera and connectivity
- RX/TX Futaba 14SG
- UBEC 5A for System power
- Digital charger for the batteries
- Basic telemetry data on Futaba 14 SG
- Rest Blimp and electronics related accessories
- Status Ready to fly - All included except helium
- Maximum speed - up to 50 km/h
- Air time 60+ minutes depending on piloting style (combined flight and hovering)
- Temperature conditions -10 to 50 Celsius
- Flight range with Futaba 14 SG up to 4 km
- Flight ceiling up to 300 m from start point
Price: 8.370 Euro

Optional
- DJI or ViewPro Camera gimbal + FPV from 2.000 to 25.000 Euro
- Autopilot (Pixhawk, ArduinoPilot or MicroPilot) with setting starting from 1.000 Euro
- DMD Extended RC control + FPV (20 km) – from 2.000 Euro

2. UniBlimp Duo 11 m

 

UniBlimp-Duo 11 m is our largest model only battery powered. It is designed for several hours of flight autonomy and able to carry 1 to 2 kg Surveillance gyro stabilized Camera + IR "heads" or other specific payload. It has double (front and back) central axis vectored motors that are controlling all flight directions. This way we were able to take out ailerons, reverse motors and other features of classic Blimp designs and save the lift for batteries and payload. Depending on your needs it can be delivered with Futaba, few miles range, or with DMD 50 km range. Autopilot is optional for this model/size.


Specification UniBlimp-Duo related:
- 11 x 2 m
- Volume 28 m3
- Double welding technology
- Envelope material 100 microns White Polyurethane High Grade UK quality
- Helium permeability 0.5 to 1% maximum daily on total volume - guaranteed
- Double front and back vectored motors design
- Security RC safety valve
- Security RC Bobbin
- 3 flight stabilizers
- 2 x Elite 520 kv Brush-less motor 
- 2 x 90 A ESC 
- LiPo battery 4 x 5000 mAh 6S 22 V - for the main motors and on-board RC System
- LiPo battery 5000 mAh 3S 11.1 V for the Camera and connectivity
- RX/TX Futaba 14SG
- Double Futaba synchronized receivers (front and back)
- 2 x UBEC 3A for System power
- Digital charger for the batteries
- Basic telemetry data on Futaba 14 SG
- Rest Blimp and electronics related accessories
- Status Ready to fly - All included except helium
- Maximum speed - up to 50 km/h
- Air time 120 + minutes depending on piloting style (combined flight and hovering)
- Temperature conditions -10 to 50 Celsius
- Flight range with Futaba 14 SG up to 4 km
- Flight ceiling up to 300 m from start point
Price: 16.930 Euro

Optional
- DJI or ViewPro Camera gimbal + FPV from 2.000 to 25.000 Euro
- Autopilot (Pixhawk, ArduinoPilot or MicroPilot) with setting starting from 1.000 Euro
- DMD Extended RC control + FPV (50 km) – from 3.000 Euro.

3. UniBlimp Solar 10 m

 

UniBlimp Solar is a single front engine Solar powered RC Blimp (Airship). Designed to fly until sufficient sunlight with especially designed intelligent power distributor. Able to carry GoPro with gimbal or other similar weight DJI or other camera solution. It has single front strong brushless motor, back reverse motor, Stabilizers with ailerons and bases for camera rig, batteries and electronics. Depending on your needs it can be delivered with Futaba, few miles range, or with DMD 20 km range. Autopilot is optional for this model/size.

Specification:
- 10 x 1.7 m 
- Volume 17 m3
- Envelope Area 46 m2
- Envelope material Polyurethane 125 microns white UK quality
- Double welding technology
- Helium permeability 0.5 to 1% on total volume maximum daily - guaranteed
- RC Safety valve
- RC safety bobbin
- 4 stabilizers with ailerons
- 1 low stabilizer reverse motor (left/right control)
- 2 horizontal stabilizers reverse motors (up/down control)
- 1 main motor positioned on the nose
- Pitchler or Hackler flat design main motor
- Carbon 23 to 25 inch propeller
- Battery and control electronics compartment 3D printed
- Main motor mount 3D print and aluminum combination
- 4 x 6000 mAh 5S LiPo batteries (2 groups by 2 batteries)
- 6 groups of solar cells on top of the Blimp
- On-board battery charger and battery charge controller
- Smart electronic controller to switch battery packs (charge/use)
- Futaba 14 SG
- Rest Blimp and equipment related accessories
- Status Ready to fly - All included except helium 
- Maximum speed - up to 50 km/h
- Air time 60+ minutes depending on piloting style (combined flight and hovering)
- Temperature conditions -10 to 50 Celsius
- Flight range with Futaba 14 SG up to 4 km
- Flight ceiling up to 300 m from start point
Price: 27.340 Euro

Optional
- DJI or ViewPro Camera gimbal + FPV from 2.000 to 25.000 Euro
- Autopilot (Pixhawk, ArduinoPilot or MicroPilot) with setting starting from 1.000 Euro
- DMD Extended RC control + FPV (50 km) – from 3.000 Euro.

4. UniBlimp Duo Solar 15+ m

 

For UniBlimp-Duo Solar please contact us at secure email: rczeppelin@protonmail.com